Key takeaways
- Compare the best cabinet pulls by size, finish, and tier, from matte black bar pulls in bulk packs to a golden champagne designer pull for any room.
The best cabinet pulls for most kitchens are bar pulls with 3 inch or 3-3/4 inch center-to-center hole spacing, because those two sizes match the drilling on the majority of existing doors and drawers and drop in as direct replacements. If your cabinets are new or undrilled, you have more freedom: longer pulls in the 5 inch to 6-5/16 inch range give wide drawers a balanced, furniture-like look. Finish drives the visual result more than shape does, so this guide compares five pulls across matte black, oil rubbed bronze, brushed brass, champagne bronze, and golden champagne, in budget, mid-range, and premium tiers. Every pick below is described from its published specifications, including hole spacing, projection, material, and pack count, so you can match a pull to your cabinetry before ordering a full set.
As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose the Best Cabinet Pulls
- The 5 Best Cabinet Pulls
- 1. Ravinte 35 Pack 5 Inch Cabinet Pulls, Matte Black
- 2. Cosmas 4392ORB Oil Rubbed Bronze Pull, 10 Pack
- 3. Cosmas 161-3BB Brushed Brass Euro Bar Pull, 10 Pack
- 4. Franklin Brass Francisco Pull, Champagne Bronze, 10 Pack
- 5. Amerock Ballard Pull, Golden Champagne
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose the Best Cabinet Pulls
Measure center-to-center spacing first. A pull mounts with two screws, and the distance between those screw holes is its center-to-center measurement. Common sizes are 3 inches (76 mm), 3-3/4 inches (96 mm), 5 inches (128 mm), and 6-5/16 inches (160 mm). If you are replacing existing hardware, measure the old holes and buy the same spacing, and the new pulls cover the old footprint with no patching or drilling. If the cabinets are new, choose spacing by drawer width: short pulls suit narrow drawers and doors, while wide drawers look better and open more comfortably with a longer pull.
Check projection. Projection is how far the pull stands off the drawer front. Most bar pulls project roughly 1 to 1-3/8 inches, which leaves room for fingers to wrap behind the bar. A shallow projection looks sleek but can feel cramped on heavy drawers loaded with cookware, so match projection to how the drawer is used.
Pick a finish that agrees with the room. Matte black reads modern and hides fingerprints well. Oil rubbed bronze leans traditional and pairs with warm wood tones. Brushed brass and the champagne family add warmth without the glare of polished metal, and they coordinate with faucets and lighting in similar tones. Ordering one finish across doors and drawers keeps the room unified, even when you mix pull lengths by drawer size.
Mind the pack count and screws. Whole-kitchen projects often need 25 to 40 pieces, so bulk packs lower the effort of counting and matching. Confirm that mounting screws are included, and note that standard pulls ship with screws sized for drawer fronts; thick drawer boxes with applied fronts may need longer screws, which hardware stores stock in the same 8-32 thread.
Match the tier to the project. Budget multipacks make sense for full kitchens, rentals, and flips. Mid-range pulls add heavier castings and more refined finishes for a primary kitchen. Premium designer pulls are sold individually and work best where each piece is on display, such as an island, a vanity, or a built-in hutch.
Consider the pull style. Bar pulls dominate modern kitchens because the straight rail is easy to grab from any angle and wipes clean quickly. Cup pulls suit farmhouse and traditional drawers but mount only on drawers, so they usually pair with knobs or bar pulls on doors. Edge pulls sit on the top edge of a drawer front for a nearly invisible look, though they offer less finger room. Finger pulls and appliance pulls fill niche roles on integrated panels. Staying with one style family across the room, and varying only the length, keeps the design calm.
Plan the install before ordering. Count every door and drawer, then add a few spares for future repairs or a later matching project. Doors usually take one pull placed near the top corner of the opening side, while drawers take one centered pull or two pulls on fronts wider than about 30 inches. A cabinet hardware jig or the paper template included with some pulls keeps hole placement identical from one front to the next, which is what makes the finished run look professional.
The 5 Best Cabinet Pulls
1. Ravinte 35 Pack 5 Inch Cabinet Pulls, Matte Black
Ravinte sells this square-profile bar pull in a 35 pack sized for whole-room projects, which makes it the practical budget pick when a kitchen needs every door and drawer changed at once. Each pull measures 5 inches in overall length with a 3 inch hole center, the most common replacement spacing, so the set fits standard drilling without new holes. The pulls are stainless steel with a matte black finish, a combination that shrugs off fingerprints and suits modern, farmhouse, and transitional kitchens alike. Mounting screws are included, and the flat-sided bar gives fingers a secure grip on wide, heavy drawers.
Specs
- Brand and model: Ravinte 5 Inch Cabinet Pulls, 35 Pack
- Style: Square bar pull
- Material: Stainless steel
- Finish: Matte black
- Overall length: 5 inches
- Center-to-center spacing: 3 inches
- Pack count: 35 pulls
- Included hardware: Mounting screws
- Tier: Budget
2. Cosmas 4392ORB Oil Rubbed Bronze Pull, 10 Pack
The Cosmas 4392ORB brings a traditional oil rubbed bronze finish to a clean, modern handle profile, bridging the gap between classic kitchens and updated cabinetry. Its 3-3/4 inch (96 mm) hole centers match the second most common drilling pattern, and the 1.06 inch projection keeps the profile close to the drawer front for a tailored look. Sold in a 10 pack, it suits a bathroom vanity, a small kitchen, or a furniture refresh where a full bulk carton would be more than the project needs. Cosmas covers its cabinet hardware finishes with a lifetime warranty, per the brand’s published policy.
Specs
- Brand and model: Cosmas 4392ORB, 10 Pack
- Style: Modern handle pull
- Finish: Oil rubbed bronze
- Center-to-center spacing: 3-3/4 inches (96 mm)
- Projection: 1.06 inches
- Pack count: 10 pulls
- Model number: 4392ORB-10 Pack
- Tier: Budget
3. Cosmas 161-3BB Brushed Brass Euro Bar Pull, 10 Pack
The 161 series is the classic Euro bar pull: a straight round bar held by two short posts, finished here in brushed brass for a warm, current look. The 3 inch (76 mm) center-to-center spacing is the most widely used replacement size, and the 1.31 inch projection leaves generous finger room behind the bar, which helps on deep drawers. The listing gives the metal type as alloy steel and brass with a brushed brass exterior finish, and each 10 pack includes mounting screws. This is the mid-range pick for anyone who wants the brass trend in a proven, no-fuss profile.
Specs
- Brand and model: Cosmas 161-3BB, 10 Pack
- Style: Euro bar pull
- Finish: Brushed brass
- Center-to-center spacing: 3 inches (76 mm)
- Projection: 1.31 inches
- Metal type: Alloy steel and brass, per the listing
- Pack count: 10 pulls
- Included hardware: Mounting screws
- Model number: 161-3BB – 10 Pack
- Tier: Mid-range
4. Franklin Brass Francisco Pull, Champagne Bronze, 10 Pack
Franklin Brass, a Liberty Hardware brand, makes the Francisco pull in champagne bronze, a soft metallic tone that sits between gold and bronze and coordinates with the champagne bronze faucets sold under sibling brands. The pull is aluminum with a 3 inch center-to-center spacing and a 3.94 inch overall length, a compact footprint that works on doors and standard drawers. The Francisco profile belongs to the brand’s Straight Bar family, so matching pieces in other sizes carry the same look across a room. The 10 pack format fits vanities, small kitchens, and dresser updates.
Specs
- Brand and model: Franklin Brass Francisco P29520Z-CZ-B, 10 Pack
- Style: Straight bar pull
- Material: Aluminum
- Finish: Champagne bronze
- Center-to-center spacing: 3 inches (76 mm)
- Overall length: 3.94 inches
- Pack count: 10 pulls
- Manufacturer: Liberty Hardware
- Tier: Mid-range
5. Amerock Ballard Pull, Golden Champagne
The Ballard is the premium, designer-grade option in this group, sold individually so each pull can be specified exactly where it will be seen. Amerock describes the collection as a timeless architectural silhouette with handsome coining details, and the golden champagne finish adds warmth with hints of silver in reflected light, per the brand. The zinc pull spans 6-5/16 inches (160 mm) center to center with a 6.81 inch overall length, proportions that suit wide drawers, paneled appliances, and statement furniture. Installation hardware and a mounting template are included, and Amerock backs the pull with a limited lifetime warranty.
Specs
- Brand and model: Amerock Ballard BP37645BBZ
- Style: Bar pull with coined detailing
- Material: Zinc
- Finish: Golden champagne
- Center-to-center spacing: 6-5/16 inches (160 mm)
- Overall length: 6.81 inches
- Width: 0.56 inches
- Weight: 5.92 ounces
- Pack count: Sold individually
- Included hardware: Installation hardware and template
- Warranty: Limited lifetime, per the manufacturer
- Tier: Premium
Frequently Asked Questions
How do I measure my cabinets for new pulls?
Measure the distance between the centers of the two existing screw holes on a door or drawer, and buy pulls with the same center-to-center spacing. If the cabinets have no holes yet, mark the position with a hardware template or a strip of painter’s tape, drill a small pilot hole at each mark, and confirm the pull sits level before drilling the rest.
What pull size works best on wide drawers?
Wide drawers look balanced with a pull that spans a good share of the drawer front, so a 5 inch or 6-5/16 inch center-to-center pull is a common choice for drawers over 24 inches wide. Some kitchens use two shorter pulls on very wide drawers instead. Either approach works, as long as the spacing is consistent across the room.
Can I mix knobs and pulls in one kitchen?
Yes. A frequent layout puts pulls on drawers, where the two-handed grip and leverage help, and knobs on doors, where a single screw mount is enough. Keep one finish across both types so the room reads as a single design, and keep pull lengths proportional to each drawer width.
How do I keep brass and champagne finishes looking even?
Wipe the hardware with a soft cloth and warm water with mild soap, then dry it fully, which is the care method Amerock publishes for its finishes. Skip abrasive pads and harsh chemical cleaners, since they can wear the lacquer and leave one pull shinier than its neighbors. Handling all pieces the same way keeps the finish uniform across the set.
Conclusion
For a full kitchen on a budget tier, the Ravinte 35 pack delivers matte black stainless bar pulls in the most common 3 inch spacing, with enough pieces for an entire room in one box. The Cosmas 4392ORB covers traditional spaces in oil rubbed bronze with 96 mm spacing, while the Cosmas 161-3BB brings the brushed brass Euro bar profile in the same handy 10 pack format. The Franklin Brass Francisco adds a soft champagne bronze tone from an established hardware brand, and the Amerock Ballard stands as the premium single pull for wide drawers and focal-point furniture. Measure your existing hole spacing, settle on one finish family, and any of these five will refresh a room in an afternoon.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Set up recurring deliveries of everyday items on eligible products. Terms and savings are set by Amazon.
Explore Subscribe & SaveCollect the home and kitchen items you want in one registry that guests can shop from.
Create a wedding registryFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!